
|
During the home inspection the plumbing system will be inspected for the following items:
-Inspect for the type and condition of all accessible and visible water supply and waste-water and vent pipes. -Inspect and operate all fixtures and faucets where the flow end of the faucet is not connected to an appliance. -Observe for the presence of back-flow devices, anti-siphon devices or air gaps. -Observe water supply by viewing functional flow in two fixtures operating simultaneously, to check water pressure levels. -Observe functional drainage at accessible plumbing fixtures. -Inspect installation of hot and cold faucets. -Inspect mechanical drain stops if installed on sinks, lavoratories and tubs. -Inspect commodes for cracks in the ceramic material, proper and secure mounting on the floor, evidence of leaks and operation of the tank components. -Inspect all supply and drain pipes for evidence of leaks. -Observe existence of visible vent pipe system to the exterior of the structure and for proper routing and termination of the vent system. -Inspect the shower pan for leaks. -Operate and inspect exterior faucets for the presence of back flow prevention and operation. Water Testing Water Testing is available and recommended for homes with water wells. The water samples that are taken at the time of the well inspection are sent to a laboratory for analysis. The results are generally available within 36 hours. |